Dionex Corporation Home

IC and Reagent-Free IC Solutions

For ion analysis, nothing compares to a Dionex ion chromatography system. Laboratories using RFIC systems spend less time on equilibration, calibration, method verification, troubleshooting, and consistency checks because the systems minimize unintentional variations in the preparation of eluents and regenerants. RFIC systems not only reduce the manual labor of IC, they make it easy to learn and easy to use.

Dual ion chromatography is a broad term involving many applications. Dual IC involves applications such as two-dimensional ion chromatography (2-D IC), as well as dual analysis, using simultaneous or sequential injection. 2-D IC is a dual-column technique to enhance analyte selectivity and sensitivity. One example of this application is the detection of low-level toxic compounds in a matrix with interfering analytes.

Dionex Reagent-Free ion chromatography (RFIC) systems combine IC with electrolytic sample preparation (RFIC-ESP). All three systems can be equipped with optional 6- or 10-port valves to automate IC sample preparation, and support 2 mm and 4 mm chemistries without pump head changes.

Reagent-Free IC Solutions

Laboratories using RFIC systems spend less time on equilibration, calibration, method verification, troubleshooting, and consistency checks because the systems minimize unintentional variations in the preparation of eluents and regenerants. RFIC systems not only reduce the manual labor of IC, they make it easy to learn and easy to use.

Dual Configuration Solutions

Dual ion chromatography is a broad term involving many applications. With the advent of column switching techniques, dual systems, sample and solvent switching, and most importantly—powerful software control, the advantages of dual applications are becoming more accessible and their utility easier to exploit.

Sample Preparation Solutions

Dionex Reagent-Free ion chromatography (RFIC) systems combine IC with electrolytic sample preparation (RFIC-ESP). All three systems can be equipped with optional 6- or 10-port valves to automate IC sample preparation, and support 2 mm and 4 mm chemistries without pump head changes.