Columns and Accessories > IC and RFIC Columns > Concentrator Columns > Anion Concentrator Columns > IonPac UTAC-XLP1 Ultra Trace Anion Concentrator Column--Extremely Low Pressure
 
Specifications  /  Order Info  /  Data SheetsPrinter Friendly
IonPac UTAC-XLP1 Ultra Trace Anion Concentrator Column--Extremely Low Pressure

The UTAC-XLP1 Ultratrace Anion Concentrator Column is designed primarily for high purity water analysis. The UTAC-XLP1 strips ions from a measured volume of aqueous sample matrix, concentrating the analyte species thereby lowering detection limits. The UTAC-XLP1 is an ultra clean (low sulfate) concentrator column.  The UTAC-XLP1 is a general purpose concentrator for use with syringe or autosampler loading.  The UTAC-XP1 (6 x 16 mm) is an extremely low backpressure column and can be used with the AS40, AS50, or AS Autosamplers.  The UTAC-XLP1 (6 x 16 mm) Concentrator Columns can be used with single piston sample delivery pumps including the DXP-1 and DQP pumps.  The UTAC-XLP1 can be used with carbonate/bicarbonate, borate, and hydroxide eluents. The UTAC-XLP1 has a capacity of 25.0 µeq/column and a void volume of approximately 145 µL. The UTAC-XLP1 is available in 6 x 16 mm format.

IonPac UTAC-XLP1 Ultra Trace Anion Concentrator Column--Extremely Low Pressure  Specifications
Dimensions:

IonPac UTAC-XLP1 Ultratrace Anion Concentrator Column—Extremely Low Pressure:
6 x 16 mm

Mobile Phase Compatibility:

Hydroxide, carbonate/bicarbonate, or borate eluents; 1-100% HPLC solvents

Substrate Characteristics:

Bead Diameter: 17 µm

Crosslinking (%DVB): 55%

Latex Characteristics:

Functional Group: Alkanol quaternary ammonium

Latex Diameter: 85 nm

Latex Crosslinking: 6%

Hydrophobicity: Very Low

Capacity:

25 µeq/col

Void Volume:

145 µL

Order Information
UTAC-XLP1 Ultra Trace Anion Concentrator Extremely Low Pressure (6 x 16 mm)063459
Data Sheets
Concentrator and Trap Columns Data Sheet   408K
UTAC-ULP1 Ultratrace Anion Concentrator Column--Ultra Low Pressure

The UTAC-ULP1 Ultratrace Anion Concentrator Column is designed for preconcentration of inorganic anions and low molecular weight organic anions.

IonPac® UTAC-LP1 Ultratrace Anion Concentrator Column, Low Pressure

The UTAC-LP1 Ultratrace Anion Concentrator Column is designed for preconcentration of inorganic anions and low molecular weight organic anions.

TAC-ULP1 Column

The IonPac® TAC-ULP1 Trace Anion Concentrator Column is designed for preconcentration of inorganic anions and low-molecular-weight organic anions.

TAC-LP1 Column

The IonPac® TAC-LP1 Trace Anion Concentrator Column is designed for preconcentration of inorganic anions and low-molecular-weight organic anions.

TAC-2 Column

The IonPac® TAC-2 Trace Anion Concentrator Column is designed for preconcentration of inorganic anions and low-molecular-weight organic anions.

AMC-1 Column

The AMC-1 concentrator column is designed for concentration of inorganic anions and low-molecular-weight organic anions.

     
  Columns and Accessories > IC and RFIC Columns > Concentrator Columns > Anion Concentrator Columns > IonPac UTAC-XLP1 Ultra Trace Anion Concentrator Column--Extremely Low Pressure  
 
Order Literature   Privacy   Feedback   Terms of Use   Trademarks   Site Map
© 2008 Dionex Corporation. All rights reserved. www.dionex.com