| | | | Manual Injectors | | Mount your manual injector neatly on your UltiMateTM 3000 HPLC system with the Manual Injector Kit. Manual Injector Kits are available in two versions, for analytical scale and semipreparative scale injections. In addition to the valves, the kits include mounting brackets for connection to UltiMate pumps, and all required tubes, ferrules, nuts, and other parts needed for fluidic connections between the pump, valve, and your column. A start signal is generated for data acquisition. Long lifetime of the injection valve is ensured using proven ceramic parts. The Analytical Manual Injector Kit is for use with UltiMate 3000 Analytical Pumps. The Low-Dispersion Stainless Steel Injector is ideally used for samples from 0.1 µL to 1.0 mL volume. Full-loop and partial-loop injections can be performed. The kit includes a 20-µL sample loop, all necessary tubes, ferrules, nuts, and other parts needed for connections between pump, valve, and column. The Semipreparative Manual Injector Kit is suitable for full- and partial-loop injections. Sample volumes ranging from 1.0 µL to 5.0 mL can be handled. This kit includes a 20-µL and 2-mL sample loop, all needed tubes, ferrules, nuts, and other parts needed for connections between pump, valve, and column. | | | Manual Injectors Specifications | | Injection Volume | 0.1 µL to 1 mL (with adequate loops) | | Max. Pressure | 48 MPa (7000 psi) | | Wetted Surfaces | 316 stainless steel and an inert polymer | | pH Range | 0–10 (pH >10 with Tefzel® rotor seal) | | Max. Temperature | 80 °C | | Flow Passage Diameters | 0.3 mm (0.013 in.) and 0.3 mm (0.013 in.) | | Injection Volume | 1 µL to 5 mL (with adequate loops) | | Max. Pressure | 48 MPa (7000 psi) | | Wetted Surfaces | 316 stainless steel, alumina ceramic, and an inert polymer | | pH Range | 0–10 (pH >10 with Tefzel rotor seal) | | Max. Temperature | 80 °C | | Flow Passage Diameters | 0.6 mm (0.024 in.) and 0.5 mm (0.018 in.) |
| | Order Information | | Analytical Manual Injection Valve for UltiMate 3000 with 20 µL Loop | 5035.0600 | | 100 µL Syringe for Manual Injectors
| 6035.0665 | | Preparative Manual Injection Valve for UltiMate 3000 with 10 mL Loop | 5035.0601 | | Syringe, 5 mL for Manual Injection | 6035.0670 |
| | Data Sheets | | No datasheet available at this time. |
|
|
|  |  | Injectors and Autosamplers | | UltiMate® 3000 Injector and Autosampler Series delivers new levels of performance, reliability, and ease of use. |
| Modules | | | UltiMate ® 3000 LC modules achieve new levels of flexibility, performance, reliability, and ease of use. |
| LC and LC/MS Overview | Discover the UltiMate ® 3000 LCi series, and learn how LCi solutions can improve performance and productivity in your laboratory. |
| LCi Solutions |  | Find out how the UltiMate® 3000 LCi Series can provide you with LC solutions for your chromatographic challenges. |
|
|
