Thermostatted Column Compartment

Specifications / Order Info / Data Sheets

The Thermostatted Column Compartment offers precise temperature control, even under varying ambient conditions. Upgrade the module with up to two switching valves (6- or 10-port 2-position, or 7-port 6-position) mounted at the side of the compartment. These valves facilitate numerous column switching techniques supporting x2 dual technology. The compartment helps you comply with regulatory rules, automatically providing parameters for automated documentation in audit trails and reports. In addition, automated diagnostic tests and an on-line troubleshooting guide minimize instrument downtime.
The TCC-3000SD is designed to meet the requirements of any laboratory whose application is sensitive to temperature change, who need to run methods at temperatures from 5 to 70 °C and who want to increase laboratory performance and productivity with x2 dual technology.

The TCC-3000RS supports an even wider temperature range and post column cooling [more]

The TCC-3200 provides 2 pre-installed HP type valve drives to mount the user-configurable valve pods in the thermostatted compartment (5-85°C).

Temperature range of 5–70 °C, with an accuracy of ±0.5 °C and a temperature stability of ±0.1 °C.
Precise temperature control, even under varying ambient conditions [more]
Fast heat-up/cool down times—typically 15 min from 20 °C to 50 °C and from 50 °C to 20 °C.
Eluent pre-heaters for sharper peaks and better resolution.
Provides access to x2 dual technology. Take advantage of LCi column switching solutions such as application switching or parallel LC and increase your laboratory performance and productivity.

Performance Examples

Thermostatted Column Compartment Specifications
Temperature Range	TCC-3000SD: 5 °C to 70 °C TCC-3200: 5 °C to 85 °C (both 18 °C below ambient)
Temperature Accuracy	±0.5 °C
Temperature Stability	±0.1 °C
Temperature Precision	±0.1 °C
Column Capacity	Up to twelve columns, depending on column length Maximum column length: 30 cm
Heat-up/cool-down time	Typically 15 min from 20 °C to 50 °C Typically 15 min from 50 °C to 20 °C
Optional SST (2P-6P, 2P-10P) or Titanium (6P-7P) Valves	0.25 mm (0.01 inch) ID 41 MPa (6000 psi) max. pressure
GLP	Dionex AutoQ ^TM routines for Instrument Qualification Column Identification System for four columns
PC Connection	USB
Inputs/Outputs	Two digital inputs/outputs Two relay outputs
Power Consumption	150 VA max.
Dimensions (h x w x d)	19 × 42 × 51 cm (7.5 × 16.5 × 20 in.)
Weight	TCC-3000: 12.6 kg (27.7 lbs) TCC-3200: 13.2 Kg (29.0 lbs)

Order Information
TCC-3000SD Thermostatted Column Compartment	5730.0010
TCC-3200 Termostatted Column Compartment Base Module with two integrated valve actuators	5722.0035

Data Sheets
No datasheet available at this time.

Overview of Column Compartments and Flow Managers

UltiMate^® 3000 column compartments and flow managers for accurate and precise temperatures.

Multiple Benefits of x2 Dual Systems

Open up your laboratory to unprecedented levels of productivity and performance with our unique x2 dual technology.

Modules

UltiMate ^® 3000 LC modules achieve new levels of flexibility, performance, reliability, and ease of use.

LC and LC/MS Overview

Discover the UltiMate ^® 3000 LCi series, and learn how LCi solutions can improve performance and productivity in your laboratory.

LCi Solutions

Find out how the UltiMate^® 3000 LCi Series can provide you with LC solutions for your chromatographic challenges.

Chromeleon Chromatography Management System

Whether you use HPLC, IC, or GC—whether your scope is a single instrument, a laboratory, a department, or an enterprise—Chromeleon adapts to your needs.


	Thermostatted Column Compartment

Order Literature Privacy Feedback Terms of Use Trademarks Site Map